COUPLE BRAKE CALIPERS BREMBO .484
The Brembo calipers of the ".484" series aim to satisfy the needs of those who want to improve the performance of the braking system, giving the bike a strong mark from Cafè Racer. This caliper is completely obtained from the CNC, starting from an aluminum block worked with the most modern Cam technologies. The two semi-pivots are then joined with three steel screws placed inside the wheel side. In the caliper body there are 4 pistons with a diameter of 32 mm. The name ".484" given by Brembo, derives from the displacement of a single piston of the caliper measured in "cubic inch", typical of the VTwin market.
This clamp adopts radial fixing technology to guarantee maximum operating precision.
The sliding of the pads on the body takes place through special guides, obtained on the body of the caliper, which allow the elimination of the pad pins. The finish of the caliper is obtained with a hard oxidation treatment in anthracite black, while a large Brembo logo, in the characteristic red color, is obtained on the top of the piston, on the disc inlet side.
The pair of pliers is supplied in kit with: already installed sintered pads, specific instruction sheet and Brembo adhesive pair.
|Caliper Body||2 Pezzi|
|Ø Pistons mm||32|
|Disc height mm||32-34|
|Surface protection||Black hard anodized|
|Weight w/o pads (gr)||735|
|Mounted pads included||yes|
|Note||2 calipers kit|